ADHESIVE MORTAR
ONE OF THE FUNDAMENTAL PILLARS OF THE ETICS – RONATHERM SYSTEM
Technological mortars are products used daily by construction professionals in repairs, refurbishments and new construction. They offer great workability and excellent technical and mechanical properties.
INSULATION PANELS
MAIN ELEMENT FOR EXTERIOR THERMAL INSULATION
The insulating material is the main element of exterior thermal insulation systems, as it provides the insulating capacity. Choosing it is the responsibility of the technician, and its sizing will be determined with the help of energy simulation programmes.
ETICS rhonatherm® is a comprehensive system endorsed by an ETE (European Technical Evaluation) in which the insulation material that forms part of the system is specified.
ANCHORS
THEY PROVIDE SECURITY FOR THE INSTALLATION
Anchors are fastening elements for the installation of this system, which offer a greater or lesser safety coefficient depending on the choice of the system. Isaval has four different types of anchors.
Greater overall system stability. Through the adhesive, wind loads and the weight of ETICS rhonatherm® are transmitted to the substrate. The anchors are ordered by means of permanent contact pressure, when the intervening forces are broken down and transferred to the support.
They develop sufficient contact pressure. The difference in temperature between the internal and external sides of the insulating panels due to the influence of heat and cold can cause stresses that can deform them. If the adhesive does not carry out the function of counteracting these stresses, only the anchors that develop sufficient contact pressure can match these stresses.
High safety against special wind loads such as high buildings, isolated building edges, highly exposed places and coastal regions.
Security on inappropriate supports. In adhered systems, the anchors provide secure fixing to those unsuitable substrates where their suitability has not been tested (existing paints with little consistency or with the presence of dirt or that produce some chemical reaction, etc.) and which do not resist the installation and the loads provided. High-quality anchors reduce the risk of ETICS detachment.
FIBREGLASS MESH
REINFORCES YOUR INSULATION SYSTEM
The fibreglass mesh threads are intertwined and braided, not allowing them to slide, thus increasing the tensile strength.
Its main characteristics are the following:
- High tensile strength. It reduces the effect of tensile stresses on the mortar base coat, which are less resistant to these stresses, preventing them from concentrating and causing cracking.
- Resistance to alkalinity. The mesh is protected with a resin film, which gives it a plastic appearance, protecting the fibreglass from the attack of alkaline metals found in mineral mortars.
- It increases impact resistance. Adjacently, the impact resistance of the system is increased by the installation of a double reinforcement in the specific areas of the façades.
PRIMER
IMPROVES ADHESION
The primer improves the adhesion of the final coat of acrylic mortar, regulates the degree of absorption of the support, reduces the risk of efflorescence and improves the uniformity of the finishing colour.
It is applied using a brush, roller or spray gun.
FINISHING COATINGS
PERSONALISED AESTHETICS AND DESIGN
Developed to meet the technical needs of each project.
We have a wide range of finishes depending on the aesthetics and the degree of protection you want to achieve. Synthetic 100% acrylic coatings, finishes formulated with siloxanes, including materials made with nanoparticles to improve aesthetic and functional performance.
Developed to meet the technical needs of each project.
We have a wide range of finishes depending on the aesthetics and the degree of protection you want to achieve. Synthetic 100% acrylic coatings, finishes formulated with siloxanes, including materials made with nanoparticles to improve aesthetic and functional performance.
DECORATIVE FINISHES
FLAWLESS EXTERIOR APPEARANCE
A different way of giving the façades an aesthetic and decorative protection that differs from the monochrome of continuous cladding, thanks to totally decorative finishes that use coloured quartz granules or multicoloured chips, including flexible synthetic tiles as a simulation of face brick and purely physical protection finishes using thick aggregate spraying.
All these products are exceptional in terms of waterproofing and breathability to water vapour and have been endorsed by the different tests to which they have been subjected.
FIXING AND ANCHORING ELEMENTS
Anchorage for light and heavy loads on the ETICS, either before and/or after installing the rhonatherm® system.
If you want to start upgrading your building, we will be happy to advise you.
This post is also available in: Spanish
Navegación
Blog
Subscribe to our blog

Where to find us
Casanova.
46394, Ribarroja del Turia
Valencia, España